Error bounds and error intervals when rounding
Machine translation
Learn
A rounded number is not the exact value. If a measurement is given as 3.4 when rounded to the nearest tenth, the exact value x could be any number that rounds to 3.4.
Those numbers go from 3.35 up to just before 3.45. 3.35 rounds up to 3.4, so it counts. 3.45 rounds up to 3.5, so it does not count. You write 3.35 ≤ x < 3.45 and read it as “x is greater than or equal to 3.35 and less than 3.45”. 3.35 is the lower bound and 3.45 is the upper bound: the ends of the error interval. The lower bound is included; the upper bound is not.
All the values that round to 3.4: the filled dot is included and the empty one is not The maximum error when rounding is half of the unit of the place. The bounds are the rounded value minus and plus the maximum error: 3.4 − 0.05 = 3.35 and 3.4 + 0.05 = 3.45. The rounded value sits in the middle of the interval, which is one unit of the place wide.
Rounding to Maximum error To the nearest ten 5 To the unit 0.5 To the nearest tenth 0.05 Half a unit of the place: the maximum error When you truncate, the exact value goes from the truncated number up to less than one unit more: a number truncated to the nearest tenth that gives 3.4 satisfies 3.4 ≤ x < 3.5. With significant figures, the unit is the one of the last digit you keep: 450 to 2 significant figures has a unit of 10, so 445 ≤ x < 455.
Bounds are useful in calculations with positive measurements. In a sum or a product, the upper bound comes from the upper bounds, and the lower bound from the lower bounds. In a subtraction a − b, the upper bound is the upper bound of a minus the lower bound of b, and the lower bound is the lower bound of a minus the upper bound of b. In a division a ÷ b, the upper bound is the upper bound of a divided by the lower bound of b, and the lower bound is the lower bound of a divided by the upper bound of b. This works for area, perimeter and mean speed.
Lower bound Upper bound Length, 12 cm 11.5 12.5 Width, 8 cm 7.5 8.5 Area 86.25 106.25 Measurements rounded to the nearest centimetre: the area is between 86.25 and 106.25 cm² If a number rounds to 4.5 to the nearest tenth and to 5 to the nearest whole number, both facts are true at the same time: you take the greater lower bound and the smaller upper bound. And you give an answer to the finest accuracy at which its two bounds round to the same number: 6.98 and 7.02 agree to the nearest tenth (7.0), but not to the nearest hundredth.
Worked examples
Example 1
Tony measures a plank and writes down 2.4 m, rounded to the nearest tenth. Between which values does its exact length lie?
- It has been rounded to the nearest tenth: the unit of the place is 0.1, and the maximum error, half of it, is 0.05.
- Lower bound: 2.4 − 0.05 = 2.35. Upper bound: 2.4 + 0.05 = 2.45.
- 2.35 rounds up to 2.4 and is included. 2.45 rounds up to 2.5 and is not included.
2.35 ≤ x < 2.45
Watch out! Here many people add and subtract 0.1 and write 2.3 ≤ x < 2.5: they use the whole unit of the place and not half of it.
Example 2
A rectangle is 12 cm long and 8 cm wide, rounded to the nearest centimetre. Between which values does its area lie?
- Length: 11.5 ≤ length < 12.5. Width: 7.5 ≤ width < 8.5.
- Lower bound of the area: 11.5 × 7.5 = 86.25 cm². Upper bound: 12.5 × 8.5 = 106.25 cm².
- The area is not worked out with 12 × 8 = 96: that is only one value inside the interval.
86.25 ≤ area < 106.25 cm²
Watch out! Here many people work out 12 × 8 = 96 and think the area is exactly 96 cm².
Example 3
Vera weighs a bag and writes down 450 g, rounded to 2 significant figures. Between which values does its exact weight lie?
- The 2 digits are the 4 and the 5. The last one, the 5, is in the tens place: the unit of the place is 10, and the maximum error is 5.
- Lower bound: 450 − 5 = 445. Upper bound: 450 + 5 = 455.
- 445 rounds up to 450 and is included. 455 rounds up to 460 and is not included.
445 ≤ x < 455
Watch out! Here many people take the unit of the ones place and write 449.5 ≤ x < 450.5.
A challenge to think about
Use a millimetre ruler to measure two sides of an object and write the error interval for each measurement. Work out between which values the area of the rectangle they form lies. To how many significant figures would you dare to give the area, so that the two bounds agree?
Practise
Rounds of 10 questions. Choose a level:
Your grade in this topic:No grade yetDo a round at the Basic level to get a grade.